Random cut-off frequencies, controlled by the
control wheel.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
KNOB SETTINGS:
VCO1: [Rectangle] [(middle)] [16']
VCO2: (N/A)
PORTAMENTO: [0]
VCOMIX: [10] [ 0] [ 0] [ 0]
HPF: [ 6] [ 9] [10] [10]
LPF: [ 5] [ 9] [10] [ 0]
MG: [(max)] [6]
EG1: (N/A)
EG2: [5] [0] [10] [10] [10]
ESP: (N/A)
PATCHES:
1. MODULATION GENERATOR (OUT RECTANGLE) ->
SAMPLE & HOLD (CLOCK)
2. NOISE GENERATOR (PINK) -> SAMPLE &
HOLD (IN)
3. SAMPLE & HOLD (OUT) -> VCA (IN)
4. CONTROL WHEEL -> VCA (CONTROL INPUT)
5. VCA (OUT) -> VOLTAGE CONTOLLED
OSCILATOR 1 (TOTAL)
NOTE: Use control wheel in upper direction to
create sample & hold sound. In middle and
lower part of the control wheel, the sample
& hold module is not used.
CHANGES:
- Use the CONTROL WHEEL for changing the
amount of the sample & hold effect
- Change BOTH HP FILTERS (CUTOFF
FREQUENCY/PEAK) for changing random cutoff
frequencies
- FREQUENCY MODULATION (MG/T.EXT) for
generating random notes
- PORTAMENTO to vary the rate of glide
NOTE: The knob settings are reproduced and
not from the movie. The result may differ a
little bit. Tags :korgms20ms-20spacesampleholdvcavoltagecontrolledamplifier
This is a Korg SQ-10 (analog sequencer)
playing a 16-step sequence on a Korg MS-20.
The first 8 steps (Channel A) only use VCO1.
The other 8 (Channel B) only use VCO2.
Channel C controls the HPF (per step). Also
each 3rd and 11th step the some white noise
is added via EG1 and VCA. The SQ-10 is synced
with a Korg Triton (which is only used for a
simple drum part) via a Doepfer MSY1.
If you're interested in knob/patch settings,
let me know (I took some pictures). Tags :korgms20ms-20spacesq10sq-10analogsequencer
Here you can hear my Minimoog and my Moog
Prodigy, which both are controlled from the
little nice softwaresequencer Seq-303. The
Minimoog plays an 8-note-sequence and the
Prodigy an 16-note-sequence, which both are
repeating at the end. The MIDI-signal comes
from my windows-computer into a Doepfer MSY-1
MIDI-to-Sync-Interface, which triggers my
modified Roland TR606. From the MIDI-thru of
the MSY-1 the MIDI-signal runs to another
Doepfer-box, the MCV4 - a
MIDI-to-CV/Gate-Interface, which controlls
the Moog Prodigy. From this Interface the
MIDI-signal went finally into the
Lintronics-MIDI-Interface, which is build
inside of the Minimoog. The soundeffects you
can hear are a reverb-program from my Zoom
RFX1000 and a delay-program from my Alesis
Quadraverb. Tags :analoganaloguesynthesizerminimoogmoogprodigytr606tr606ms20ms20heikomehringkorbachlengefeld
Der Korg MS 20 Synthesizer ist ein Klassiker
seiner Zeit aber auch heute noch viel in
Gebrauch. Er prägte den deutschen New Wave
Sound der 80 er und hat einen sehr
indiviuellen Klang. Ich zeige unter anderem
wie man auch mit einer E-Gitarre diesen
halbmodularen Synth steuern kann. Weitere
Infos auf www.musotalk.de Tags :KORGMS20SteinbergCubaseRolandSynthNativeInstrumentsMassiveKoreAURTASProToolsUADMIDIAudioRecording